PVC Sandblasting Protective Film for Glass Carving by ZAC LYNN-UCOLIN
Structure: PVC film + Glue + Paper liner
Thickness Width Length Color
0.08-0.18mm 30-120cm 10-240m Yellow/white/red/blue/black/green
PVC Sandblasting Protective Film is made from polyvinyl chloride as backing material, and coated with rubber pressure-sensitive adhesive.
Owning excellent insulation, good viscosity, high-tensile, burn-resistance, cold-resistance excellent properties, makes PVC Sandblasting Protective Film suitable for sand blasting, glass engraving, the light spraying, deep carving, stone carving, tile carving, etc.
How do it work?
• The required design is traced out on the PVC.
• The area to be sandblasted is cut and removed.
• The exposed areas are sandblasted.
• The remaining film is removed from the glass surface.
Technical Datasheet:
Peel Strength 3.5-8.0N/cm
Tensile Strength 16-28N/cm
Temperature 4-80°C
Elongation 160%
