Silicone Vacuum Bag for EVA Glass Laminating Machine&Autoclave

Silicone Vacuum Bag for EVA Glass Laminating Machine Autoclave

Silicone Vacuum Bag for EVA Glass Laminating Machine&Autoclave

By Zac Lynn

+The combination of the silicone bag:

-Upper Silicone Sheet
-Down Silicone Sheet
-Edge Gear
-Silicone Tube

+Technical Parameters of Silicone Vacuum Bag

Tensile strength
Tearing strength
Hardness
Breaking extensibility

Color
Pattern Temperature Resistance
6.5(Mpa) 26(N/mm) 55±5(Shore A) 450% Transparent
One smooth
One cloth grain 230 °C

+Description:
-Product Purpose: used for glass vacuum laminating machines to make
safety laminated glass with EVA FILM INTERLAYER, or for making privacy glass, switchable glass with PDLC FILM and EVA FILM
-Product features: heat-resistant, aging-resistance , anti-corrosive,environment-friendly, Long-use life, good resistance

+Product specification:
1) common thickness: 3mm
2) maximum width:3800mm with no joint
3) any length
4) common color: transparent,red, and any color available
Customization is available as customers require

+Notes When Using the Silicone Vacuum Bag

-Please edging the glass before laminating, which can prohibit the sharp glass edges of the glass cut the silicone bag.
-Use tape to seal the pre-laminated glass to reduce the EVA leaking from the laminated glass.
-Use some papers/fabric to cover the silicone bag to separate the EVA from the silicone bag
-Put some wires net on the vacuum hole to help vacuuming.
-When not laminating , put the silicone bag out of the hot oven.

+ Procedure of Ordering:
(1)Be ware of the kind of silicone you need: for EVA glass lamination or for solar encapsulation.

(2)If you need silicone vacuum bag for EVA glass lamination, please offer the internal size and external size of the silicone bag.

If you need silicone rubber sheet for solar encapsulation, please offer the thickness, width, length.

All rights reserved by
UCOLIN SILICONE
SILICONE VACUUM BAG FOR EVA LAMINATING MACHINE
SILICONE VACUUM BAG FOR PVB AUTOCLAVE VACUUMING
[email protected]
www.ucolin.com www.silicone4.com

Silicone Sheet for Wood Door Vacuum Laminating Machine Vacuum Press Machine Vacuum Filming Machine


Product Specification

1-common thickness:2mm,3mm
2- maximum width: up to3800mm, without split joint
3-any length
4- common color: grey transparent
5-excellent elasticity
6-longtime flexibility

Product Features

silicone sheet is produced with advanced techniques and special equipment, large drum-type vulcanization unit , so the silicone sheet owning the high tear-resistant, high level of stability, a good evenness and reliability, and its heat resistant up to 250℃.

THE HISTORY OF LAMINATED GLASS(LAMINATING INTERLAYER)

THE HISTORY OF LAMINATED GLASS(LAMINATING INTERLAYER)
WWW.HELLOGLASS.COM

1906, Englishman used a kind of celluloid or other plastic thin film between two glasses to make laminated glass.
1916, Some glass laminating manufacturer used glue and celluloid together to make laminated glass.
1917, Some glass laminating manufacturer used glue, varnish and celluloid together to make laminated glass.
1920, Some glass laminate manufacturer used cellulose ester to make laminated glass.
1938, Some glass laminate manufacturer used acrylate monomer to make laminated glass.
1941, Some laminated glass manufacturer used Vinyl resin film to make laminated glass.
Not long later, One kind of Vinyl resin film dominated the glass laminating interlayers, the film is polyvinyl butyral film.
Later on, the polyvinyl butyral film, PVB Film, has been modified for mechanical properties, temperature resistance properties, light resistance properties.
Some PVB FILM is highly advanced modified and used a new name, like SGP FILM, one kind of PVB FILM modified by DUPONT.
In the early of 21 century, EVA FILM, ethylene vinyl acetate, is used to make laminated glass. EVA Film is easy to processed in simple laminating machine and plays a important roll in laminated glass interlayer market. And EVA Film has been modified in mechanical properties, temperature resistance properties, light resistance properties. Some type of EVA FILM (eg. CNC-FORCE) can be used to replace PVB FILM in architectural laminated glass both indoor and outdoor.