HOW TO USE CNC GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING

BY PETER LIN
Do you have a video or photograph on how to use this CNC GREEN TAPE in EVA FILM glass laminating? What is the function of the CNC GREEN TAPE for EVA FILM glass laminating?
High temperature CNC GREEN TAPE is to fix the pre-laminated glass with EVA FILM, and perfectly prevent the melt EVA FILM overflowing through laminated glass edges in the oven when heating.

01 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING

02 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING

03 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING

04 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING

05 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING GLAZING

06 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING GLAZING

07 HOW TO USE GREEN TAPE(HEAT RESISTANCE) IN EVA FILM GLASS LAMINATING GLAZING

If we use the CNC GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, do we need to make some holes on the CNC GREEN TAPE for vacuuming?

It depends. If you don’t make holes on the CNC GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the CNC GREEN TAPE, so you can get the cleaner result of the edges of the final laminated glass. But if you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the CNC GREEN TAPE to help pre-laminated glass vacuuming.

How Cnc Green Tapes Preventing Melt Eva Film Over Flowing Out of Laminated Glass Edges in the Oven

What is the specifications of CNC GREEN TAPE?
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll

Does CNC GREEN TPAE leave glues on the glass?
NO! No left remains of CNC GREEN TAPE on glass surface after peeling off. CNC GREEN TPAE can stand continuously heating more than 180℃with strong tear resistance.

May i have the CNC GREEN TAPE technical datasheet?
TECHNICAL DATASHEET OF CNC GREEN TAPE:
TESTED Item GREEN THERMAL TAPE
Color Green
Sealant Materials Silicone
Sealant Materials Thickness 0.035±0.005mm
Thickness of Tape Sheet 0.06±0.005mm
Temperature Resistance 180℃ Continuously heating
200 ℃ Discontinuously heating
Tear Strength 120 N/25mm
Adhesive Strength 7.5 N/25mm
Elongation 55%
Volage Resistance 5 KV
Insulation Resistance 1,000,000 MΩ
Insulation Grade F
ZAC LYNN UCOLINCOM

PET Green Tape for High Temperature Spray of Aluminum Alloy Flour

PET Green Tape for High Temperature Spray of Aluminum Alloy Flour
ZAC LYNN

980mm*66M/roll
600mm*66M/roll
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Thickness: 0.06mm,0.08mm

The green thermal tape is applied to protecting the surface of glass and metal in high-temp paint baking and spray of aluminum alloy flour, and to protecting the surface of PCB panel during electroplating and welding.

The green thermal tape is mainly used in paint spray, paint baking, carton sealing-up, shoes, packing consolidation, building decoration and other industries.

The green thermal tape has been widely used to twining the transformer, motor, coil, capacitor and variable frequency power supplier, so as to provide high-temp insulation.

The green thermal tape is applicable to protecting fingers during PCB printing, SMT tin furnace and wave-soldering.

The green thermal tape provides insulation protection for the high-end electric appliance, and can consolidate the cell’s positive and negative poles.
Applicable to solder mask protection.
Application to bundle up the lithium battery of mobile-phone.

The green thermal tape features in excellent temperature-resistance. After peeling off, no glue is left.
High insulation, high and low temperature resistant, acid and alkali resistant, low electrolysis, excellent mechanical property, friction-resistant, tearing-resistant, strong adhesion.

TESTED ITEM GREEN TAPE
Color Green
Sealant Materials Silicone
Sealant Materials Thickness 0.035±0.005mm
Thickness of Tape Sheet 0.06±0.005mm
Temperature Resistance 180℃ Continuously heating
200 ℃ Discontinuously heating
Tear Strength 120 N/25mm
Adhesive Strength 7.5 N/25mm
Elongation 55%
Volage Resistance 5 KV
Insulation Resistance 1,000,000 MΩ
Insulation Grade F

PVC Sandblasting Protective Film for Glass Carving

03 PVC Sandblasting Protective Film For Glass Carving

02 PVC Sandblasting Protective Film For Glass Carving

PVC Sandblasting Protective Film for Glass Carving by ZAC LYNN-UCOLIN

Structure: PVC film + Glue + Paper liner
Thickness Width Length Color
0.08-0.18mm 30-120cm 10-240m Yellow/white/red/blue/black/green

PVC Sandblasting Protective Film is made from polyvinyl chloride as backing material, and coated with rubber pressure-sensitive adhesive.

Owning excellent insulation, good viscosity, high-tensile, burn-resistance, cold-resistance excellent properties, makes PVC Sandblasting Protective Film suitable for sand blasting, glass engraving, the light spraying, deep carving, stone carving, tile carving, etc.

How do it work?
• The required design is traced out on the PVC.
• The area to be sandblasted is cut and removed.
• The exposed areas are sandblasted.
• The remaining film is removed from the glass surface.

Technical Datasheet:
Peel Strength 3.5-8.0N/cm
Tensile Strength 16-28N/cm
Temperature 4-80°C
Elongation 160%

Heat Resistance Protective Green Tape Film for Glass Painting Glazing

Heat Resistance Protective Green Tape Film for Glass Painting Glazing

Heat Resistance Protective Green Tape Film for Glass Painting Glazing by ZAC LYNN-UCOLIN

Heat Resistance Protective Green Tape Film for Glass Painting Glazing

Implications:
Use for the surface protection of high temperature painting of glass, powder spray painting of aluminum alloy, the electroplating and PCB Panel plating and other techniques.

Characteristics:
High temperature resistance, Standing continuously heating more than 180℃
NO adhesives residue left after tearing off.

980mm*66M/roll
25mm*66M/roll
30mm*66M/roll
40mm*66M/roll
50mm*66M/roll
Thickness: 0.06mm,0.08mm

ZAC LYNN UCOLINCOM

01-1260°C Ceramic Fiber Paper for Fusion Kiln

UCOLIN-com