Installation of EVA Vacuum Glass Laminating Machine

Installation of EVA Vacuum Glass Laminating Machine :

⒈Vacuum Glass Laminating Machine Install control box:

⑴the control box must be carried by 2 people,use 4 nuts to fix it in the specified location.

Attention:Vacuum pump is different from blower.

⑵Electric Control box connection:connect according the signs at wire connecting

① and wire connecting②

WIRE CONNECTION OF EVA GLASS LAMINATING MACHINE

+Wire connecting①

+Wire connecting②

WIRE CONNECTION OF EVA GLASS LAMINATING MACHINE

+Power connecting

⒉Vacuum Glass Laminating Machine Vacuum pump installation:connect one side of above ¢9mX18m vacuum pipe to the vacuum pipe faucet on the table, another side is connected to the vacuum pump air pump faucet (as picture below)

⒊Vacuum Glass Laminating Machine Orbit installation: adjust the two orbits’ height, make it balance to the inside orbit of the machine, then put the up down car onto the orbit, adjust the width of the orbit; weld the outside orbit and inside orbit connecting to make it fixedness. Fix the outside orbit to the floor with screw (as picture below)

WIRE CONNECTION OF EVA GLASS LAMINATING MACHINE

All rights reserved by ★Silicone Vacuuming Bag /Sheet  for EVA Glass Laminating Machine / Solar EVA Photovoltaic Panel Encapsulations([email protected] / www.ucolin.com /[email protected])

4.Vacuum Glass Laminating Machine Lift installation: waggle the lift toward the “hour hand” direction, lift going up, waggle the lift backward “hour hand” direction, lift going down.

+Vacuum Glass Laminating Machine Machine carry: as picture below

WIRE CONNECTION OF EVA GLASS LAMINATING MACHINE

All rights reserved by ★Silicone Vacuuming Bag /Sheet  for EVA Glass Laminating Machine / Solar EVA Photovoltaic Panel Encapsulations([email protected] / www.ucolin.com /[email protected])

UCOLIN SILICONE

CNC-Ucolin is a hi-tech company specializing in the research & development, production and sales of SILICONE VACUUM BAG for EVA film glass laminating machine and SILICONE RUBBER SHEET for solar EVA film encapsulation producing line .

 

Ucolin installed advanced automatic producing equipments and built a well-qualified team. Ucolin aims to become a leading silicone bag/sheet manufacturer in China. And the most key thing we keep focusing on is improving the quality of our silicone vacuum bag/sheet.

Silicone vacuum bag for eva glass laminating machine

The experienced knowledge of the silicone vacuum bag for eva glass laminating machine and solar eva encapsulation panel , including basic knowledge and properties of the silicone vacuum bag/sheet, and the notes to pay attention to when laminating glass.

UV Radiation Accelerating Aging Tester:

UV Radiation Accelerating Aging Tester:

+The tester can imitate the weather aging. The laminated glass with EVA interlayer film will be put under the high UV radiation. And the tester will make the laminated glass in low or high humidity and in low or high temperature.

+So the tester can test the weather resistance of the EVA interlayer film, which means how long the laminated glass with EVA interlayer film can last after installed in the external environment.

Temperature and humidity tester: testing humidity resistance and high and low temperature cycle resistance

Temperature and humidity tester: testing humidity resistance and high and low temperature cycle resistance

1. testing the laminated glass with eva interlayer film under the set humidity and temperature for set time. Then see the humidity-resistance of the eva interlayer film.

2. Testing the properties of laminated glass with eva interlayer film throng unceasing circulation from below zoro low temperature and above zero high temperature cycling. Then see the weather resistance of the eva interlayer film.